English / 联系我们 / 设为首页 / 加入收藏
 您现在的位置 > 协议分析仪

MIPI UFS CTS Tester | MIPI UFS 协议合规性测试仪 | MIPI UFS 协议一致性测试仪

The Falcon G300 series with Trace Validation provides complete protocol debug and analysis of UFS and UniPro devices

Universal Features for both G300 and G350:

Supports MIPI M-PHY v3.1 HS-G3 and UniPro v1.61
Can be upgraded to support MIPI M-PHY v4.1 HS-G4 and UniPro v1.8
Speed: PWMG1-PWMG5, HSG1-HSG3 and Rate Series A & B
Link Width: x1 and x2
LUN: 0-7, plus boot, RPMB, UFS Device, Report LUN and Agnostic
Traffic Class: TC0
Transmission Modes: Auto/NonAuto
Trace capture memory depth: 8 GB
Thunderbolt 3 connectivity
Protocol support: UFS 2.x
Protocol support: UniPro 1.6x
Compliance support: UFS 2.x
Conformance support: UniPro 1.6x

数据包发生器 Exciser/Generator Falcon G350 Features:
Exerciser Stimulus
Host or device emulation, with full compliant UniPro stack in HW
Error Injection
Create specific traffic on the link, or put the DUT into a known state

Conformance Test Suite (CTS)
UFS compliance and logo testing
UFS compliance verified to JESD224 CTS
UniPro conformance testing
MOI approved by MIPI Test Work Group
MIPI conformance verified to UniPro Conformance Test Suite (CTS) v1.1

Corner, Margin and Stress testing
Execute hundreds of thousands of tests automatically
Stop after any number of loops, warnings, failures or No Result test cases.

UFS device CTS compliance
Executes test cases specified in the UFSA CTM v1.0.
Verifies test cases defined in JESD224 as modified for JESD220B, JESD220C and JESD220-2.
UFS 2.x device conformance
Trace Validation engine evaluates UFS protocol sequences for “shall” statements and logical requirements in JESD220x.
UniPro v1.1 CTS conformance
Verifies test cases as defined in the CTS, covering all tests specified in the UniPro CTS Annex C.
Method of Implementation (MOI) is approved by the MIPI Alliance Test Work Group
UniPro 1.61 spec conformance
Trace Validation engine evaluates UniPro v1.61 protocol sequences, “shall” statements and logical requirements
Custom test cases
Available in Trace Validation and Stimulus modes
Global Variables and Run Conditions control Transactions
Script execution for device control
Packet construction and Transaction analysis based on Trace Validation engine
Stress Testing
Execute any loop order by Speed, Link widths, LUNs or individual test cases
Each category can be run ascending, descending, or random seed order
Stop after a specified number of test case configuration loops or No Result Test Cases have occurred
Group, filter and summarize test results by test parameters – status, individual tests, or test rules
Summary reports and full file exports

CTS Compliance Tests - UFS 协议一致性测试
JESD224 compliance: 29 test categories and 230 test cases
Executes SCSI and UFS Command test cases
Request Sense
Mode Sense
Mode Select (10)
Start Stop Unit
Read Capacity (10)
Format Unit
Test Unit Ready
Write (6)
Write (10)
Read (6)
Read (10)
Verify (10)
Send Diagnostic
Report LUNs
Synchronize Cache (10)
Pre Fetch (10)
Context Management
UFS Task Management
UFS Boot
UFS Descriptor
UFS Flag
UFS Attribute
UFS Power Mode
UFS Unit Attention Cond

Custom Test Builders:
UFS: Test Case Builder
Command packet generation and Response packet inspection
Pre-defined Packet field and rule sets
Local and Global Variables and Run Conditions
Script execution for DUT control
Write payload insertion and Read payload analysis and comparison



点击查看 UFSA Certified MOT

欲了解更多详情,请直接联系我们 021-61457130




Flash Technology飞思德晶华贸易(上海)有限公司版权所有 电话:8621-61457130 沪ICP备11027505号-1"